|
(Specifier Note: The purpose of this guide
specification is to assist the specifier in correctly
specifying gypsum board products and installation. The
specifier needs to edit the guide specifications
to fit the needs of specific projects. Contact
a CertainTeed Product Representative to assist in making
the appropriate product selections. Throughout
the guide specification, there are Specifier notes
to assist in the editing of the file. The
term Architect is used throughout these guide specifications,
as a guide and may be edited to read “Design
Professional”,” Engineer”, “Owner” or
other appropriate designation as required for specific
project.
References have been made within the text of the
specification to MasterFormat 2004 Section numbers
and titles, specifier need to coordinate this numbers
and titles with sections included for the specific
project. Brackets [ ]; “AND/OR”;
and “OR” have been used to indicate
when a selection is required.)
SECTION 09 29 00
GYPSUM BOARD
PART 1 - GENERAL
1.1 SECTION INCLUDES:
- Gypsum board wall panels
- Gypsum Board soffit
and ceiling panels
- Accessories and Trim
1.2 REFERENCES
A. ASTM International (ASTM)
-
ASTM C 475 - Standard Specification for Joint
Compound and Joint Tape
for Finishing Gypsum Board.
- ASTM C 514
- Standard Specifications for Nails for
the Application of
Gypsum Board.
- ASTM C 665 - Standard Specification
for Mineral-Fiber Blanket Thermal
Insulation for Light Frame Construction
and Manufactured Housing.
- ASTM C 840
- Standard Specification for Application
and Finishing of
Gypsum Board.
- ASTM C 954 - Standard
Specification for Steel Drill Screws
for the
Application of Gypsum Panel Products
or Metal Plaster Bases to Steel
Studs From 0.033 in. to 0.112 in.
in Thickness.
- ASTM C 1002 - Standard
Specification for Steel Self-Piercing
Tapping
Screws for the Application of Gypsum
Panel Products or Metal Plaster
Bases to Wood Studs or Steel Studs.
- ASTM
C 1047 - Standard Specification
for Accessories For Gypsum
Wallboard and Gypsum Veneer Base.
- Gypsum
Board 09 29 00 - 2 Project
Name/Project Number/13-Jul-06.
- ASTM C 1396 - Standard
Specification for Gypsum Board
B. Gypsum Association
- GA-214 - Recommended Levels of Gypsum Board
Finish
- GA-216 - Application and Finishing of Gypsum
Board
- GA-231 - Assessing Water damage to Gypsum
Board
- GA-238 - Guidelines for the Prevention
of Mold Growth on Gypsum Board
1.3 SUBMITTALS
A. Refer to Section [01 33
00 Submittal Procedures] [insert
section number and title].
B. Product Data: Submit manufacturer current
technical literature for each component.
C. Samples:
- Board: Submit sample of each panel
product specified, [6 inches square] [insert size].
- Trim: Submit sample of each type
of trim specified, [12 inches long] [insert size].
- Texture: Submit sample [12
inches square] [insert size] of textured coated
gypsum board.
D. Quality Assurance Submittals
(Specifier Note: DELETE
Design Data, Test Report submittal requirements
when propriety specification is used and can
be held. MAINTAIN Design Data, Test Report
submittal requirement when other products may
be submitted as substitution.)
- Design Data, Test Reports: Provide manufacturer
test reports indicating product compliance with
indicated requirements.
- Manufacturer Instructions: Provide manufacturer’s
written installation instructions.
E. Closeout Submittals
- Refer to Section [01 78
00 Closeout Submittals] [insert section
number and title].
1.4 QUALITY ASSURANCE
- Qualifications: Installer shall have experience
with installation of gypsum board
under similar conditions.
- Mock-ups:
- Install mock-up using approved gypsum
products, including fasteners and
related accessories per manufacturer’s
current printed instructions and recommendations.
- Mock-up size: [10 feet by
10 feet] [insert size].
- Mockup for [[each]
[designated] level of exposed gypsum
board
finish] AND/OR [[each] [designated] texture
finish indicated]
- Mock-up Substrate: Match
wall assembly construction.
- Mock-up may [not]
remain as part of the work.
1.5 DELIVERY, STORAGE AND HANDLING
- Deliver materials in manufacturer’s
original packages, indicating manufacturer and
product name.
- Store gypsum in accordance with manufacturer
recommendations.
1.6 PROJECT CONDITIONS
- In accordance with ASTM C 840.
PART 2 - PRODUCTS
(Specifier Note: Product Information
is proprietary to CertainTeed America Inc. products.)
2.1 MANUFACTURER
- Basis of Design: CertainTeed America
Inc.; 5301 West Cypress Street, Suite 300, Tampa,
FL 33607; 1-866-4 CertainTeed USA (1-866-427-2872); www.bpb-na.com
- Equivalent Design: Manufacturer
with products of equivalent design may include,
but are not limited to:
- National Gypsum Company
- USG Corporation
2.2 GYPSUM
BOARD WALL PANELS
-
Standard Gypsum Board Products
- Regular
Gypsum Board: Gypsum core panel
solid set core enclosed in paper. Complying
with ASTM C1396.
- Basis of Design: ProRoc® Regular
or Evenwall, manufactured
by CertainTeed America Inc.
- Thickness: [1/2 inch] [1/4 inch]
[3/8 inch]
- Width: [48 inches] [54 inches]
[48 inches or 54 inches]
- Length: [8 feet]
[9 feet] [10 feet] [12 feet] [Use longest
length available to avoid
joints]
- Edges: [Square] [Rounded] [Tapered]
[Evenwall]
- Fire Rated Gypsum Board:
Gypsum core panel with
a specially formulated core
for use in fire-resistive
Type X designs. Complying
with ASTM C 1396.
- Basis of Design: ProRoc® Type
X or Evenwall
Type X, manufactured
by CertainTeed America Inc.
- Thickness: 5/8 inch
- Width: [48 inches] [54 inches]
[48 inches or 54 inches]
- Length: [8 feet] [9 feet] [10
feet] [12 feet] [Use longest
length available to avoid
joints]
- Edges: [Tapered]
[Evenwall]
- Fire Rated Gypsum Board:
Gypsum core panel with a
solid set, fire-resistive
core for use in fire-resistive
Type C designs. Complying
with and
ASTM C 1396.
- Basis of Design: ProRoc® Type
C,
manufactured by CertainTeed America
Inc.
- Thickness: [1/2 inch] [5/8
inch]
- Width: 48 inches
- Length: [8 feet] [9 feet] [10
feet] [12 feet] [Use longest
length available to avoid
joints]
- Edges: Tapered
- Moisture Resistant Products
- Water-Resistant Gypsum
Board: Gypsum core panel
with enhanced water resistant
core for use behind tile
in wet areas. Complying with
ASTM C1396.
- Basis of Design: ProRoc® Moisture
Resistant, manufactured
by CertainTeed America
Inc.
-
Thickness: 1/2 inch
-
Width: 48 inches
-
Length: [8 feet] [9 feet] [10
feet] [12 feet] [Use longest
length available to avoid
joints]
- Edges: Tapered
- Fire Rated Water-Resistant
Gypsum Board: Gypsum
core panel with enhanced
fire-resistance and water
resistance core for use in
fire-resistive Type X designs. Complying
with ASTM C 1396, Type X.
- Basis of Design: ProRoc® Moisture
Resistant Type X,
manufactured
by CertainTeed America Inc.
-
Thickness: 5/8 inch
-
Width: 48 inches
-
Length: [8 feet] [9 feet] [10
feet] [12 feet] [Use longest
length available to avoid
joints]
- Edges: Tapered
-
Specialty Products
-
Flexible Gypsum Board: Gypsum
core panel with enhanced
core to allow for flexibility; Complying
with ASTM C 1396
- Basis of Design: ProRoc® ¼” Flex,
manufactured by CertainTeed
America
Inc.
-
Thickness: 1/4 inch
-
Width: 48 inches
-
Length: [8 feet] [12 feet]
[Use longest length available
to avoid joints]
- Edges: Tapered
-
High Performance Products
-
Abuse Resistant Gypsum Board:
Gypsum core panel with enhanced
core to provide resistance
to abuse. Complying with
ASTM C 1396.
- Basis of Design: ProRoc® Abuse
Resistant, manufactured
by CertainTeed America Inc.
-
Thickness: 1/2 inch
-
Width: 48 inches
-
Length: [8 feet] [9 feet]
[10 feet] [12 feet] [Use
longest length available
to avoid joints]
- Edges: Tapered
- Fire Rated Abuse Resistant
Gypsum Board: Gypsum
core panel with enhanced
core to provide resistance
to abuse for use in fire-resistive
Type X designs. Complying
with ASTM C 1396, Type
X.
- Basis of Design: ProRoc® Abuse
Resistant Type X,
manufactured
by CertainTeed America Inc.
-
Thickness: 5/8 inch
-
Width: 48 inches
-
Length: [8 feet] [9 feet]
[10 feet] [12 feet] [Use
longest length available
to avoid joints]
- Edges: Tapered
-
Fire Rated Shaft Liner Gypsum
Board: Gypsum core shaftwall
panel with enhanced fire
resistant core. Complying
with ASTM C 1396 Type X.
- Basis of Design: ProRoc® Shaftliner
Type X, manufactured
by
CertainTeed America Inc.
-
Thickness: 1 inch
-
Width: 24 inches
-
Length: [8 feet] [12 feet]
[Use longest length available
to avoid joints]
- Edges: Modified
Tapered
-
Plaster Base Products
- Regular Veneer Plaster
Base: Gypsum
core lathing panel with face
paper for use under veneer
plaster finishes. Complying
with
ASTM
C
1396.
- Basis
of Design:
ProRoc® Veneer
Plaster Base, manufactured
by CertainTeed America Inc.
-
Thickness: 1/2 inch.
- Width: 48
inches.
-
Length: [8 feet] [9 feet]
[10 feet] [12 feet] [Use
longest length available
to avoid joints]
-
Edges: [Square] [Tapered]
- Fire Rated Veneer Plaster
Base: Gypsum
core lathing panel with
enhanced fire resistant core
for use under veneer plaster
finishes in Type X Designs. Complying
with
ASTM
C
1396,
Type
X.
- Basis
of Design:
ProRoc® Veneer
Plaster Base Type X, manufactured
by CertainTeed America
Inc.
-
Thickness: 5/8 inch.
- Width: 48
inches.
-
Length: [8 feet] [9 feet]
[10 feet] [12 feet] [Use
longest length available
to avoid joints]
-
Edges: [Square] [Tapered]
- Fire Rated Veneer Plaster
Base: Gypsum
core lathing panel with
enhanced Type C fire resistant
core for use under veneer
plaster finishes in Type
X Designs. Complying
with
ASTM
C
1396,
Type
C.
- Basis
of Design:
ProRoc® Veneer
Plaster Base Type C, manufactured
by CertainTeed America
Inc.
-
Thickness: 1/2 inch.
- Width: 48
inches.
-
Length: [8 feet] [12 feet]
[Use longest length available
to avoid joints]
Edges: [Square] [Tapered]
2.3 GYPSUM BOARD CEILING AND SOFFIT
PANELS
-
Exterior Soffit Board
- Regular Exterior
Soffit Board: Gypsum
core soffit panel with sag resistant
core. Complying with ASTM C 1396.
- Basis
of Design: ProRoc® Exterior
Soffit Board, manufactured
by CertainTeed America Inc.
- Thickness: 1/2
inch.
- Width: 48 inches.
- Length: [8
feet] [12 feet] [Use longest
length available to avoid joints]
- Edges:
Tapered
- Fire Rated Exterior
Soffit Board: Gypsum
core soffit panel
with enhanced fire and
sag resistant core for
use in fire resistive designs.
Complying with ASTM C 1396,
Type X.
- Basis of Design:
ProRoc® Exterior
Soffit Board
Type X, manufactured
by CertainTeed America Inc.
- Thickness: 5/8 inch.
- Width: 48
inches.
- Length: [8 feet]
[12 feet] [Use longest
length available to
avoid joints]
- Edges: Tapered
- Interior Ceiling Board
- Regular Gypsum
Ceiling Board: Gypsum
Core panel with enhanced sag resistant
core. Complying
with ASTM C 1396.
- Basis of Design:
ProRoc® Interior
Ceiling,
manufactured by CertainTeed
America Inc.
- Thickness:
1/2 inch.
- Width: 48
inches.
- Length: [8 feet] [12
feet] [14 feet]
[Use longest length available
to avoid joints]
- Edges: Tapered
- Gypsum Ceiling Cove
and Cornice: Profile molding
for installation at wall/ceiling joint.
Complying with ASTM C 1396.
- Basis
of Design: Ceiling
Décor
Cove and Cornice, manufactured
by CertainTeed America Inc.
- Thickness:
[3/8 inch] [3/4 inch]
- Profile
Width: [4-1/2
inch] [4-7/16 inch]
- Length: [8 feet]
[12 feet] [Use
longest length available to
avoid joints]
- Edges: Square
- Gypsum Ceiling Step:
Gypsum board used as base steps
for application of ceiling
cove and cornice.
- Basis of Design: Ceiling
Décor
Steps, manufactured
by CertainTeed America Inc.
- Thickness: 1/2
inch
- Width: 4 inches
- Length: 8 feet
2.4 ACCESSORIES
- Interior Trim: Complying with ASTM
C 1047.
- Corner Bead
- Casing Beads: [LC-Bead] [L-Bead]
[U-Bead]
- Control Joint
- Fasteners:
- Screws: [ASTM C 954] [ASTM C 1002]
as recommended by panel manufacturer.
- Nails: ASTM C 514 with heads, lengths,
configurations, and finish as recommended
by panel manufacturer.
- Adhesive: Recommended by panel
manufacturer.
- Joint Treatment
- Tape: Comply with ASTM C 475
- Joint Compound: Comply with
ASTM C 475
- Texture Finishes
- Primer
- Wall Texture: [Fine] [Medium] [Coarse]
- CeilingTexture:[Fine]
[Medium] [Coarse]
- Sealant
(Specifier Note: The use
of a separate water-resistive barrier may permit
joints and fasteners to be untreated depending
on local code requirements. Sealants
may be specified in this section or may be specified
elsewhere in Division 07. EDIT
paragraphs below dependent upon location
of sealant specification.)
- Refer to Section [07
92 00 Joint Sealants] [insert
section number and title].
OR
- Acoustical
Sealant: Nondrying, non-hardening, non-skinning,
non-staining, non-bleeding, gunnable type
as recommended by panel manufacturer.
- Insulation
(Specifier
Note: Insulation may be specified
in this section or may be specified in
Division 09. EDIT paragraphs below dependent
upon location of acoustical insulation
specification.)
- Refer to Section [09
81 00 Acoustic Insulation] [insert
section number and title].
OR
- Insulation: ASTM C 665, Type
I, mineral fiber insulation blankets
without membrane facing.
PART 3 - EXECUTION
3.1 EXAMINATION
- Examine gypsum board panels for damage
and existence of mold. Install undamaged panels
- Examine gypsum board in accordance with GA 231
for water damage.
3.2 INSTALLATION
- Comply with [ASTM C 840] [GA 216]
3.3 FINISHING
- General: Comply with [ASTM C 840] [GA 214 and
GA 216]
- Level 1: Plenums, service corridors;
above ceilings
- Level 2: Areas of water resistant gypsum
backing board under tile; exposed
areas where appearance is not critical.
- Level 3: Areas to receive heavy or medium
textured coatings; heavy-grade
wallcoverings.
- Level 4: Areas to receive flat sheen
paint finish; light textured coatings;
lightweight wallcoverings.
- Level 5: Areas to receive gloss, semi-gloss
sheen paints; critical lighting
conditions.
3.4 PROTECTION
- Protect installed products
from damage during remainder of the construction
period.
- Remove and replace panels that are
damaged.
END OF SECTION
|
