ProRoc® Brand Sandable Setting Compounds are lightweight sandable chemically setting powders used to prefill joints, embed joint tape and
conceal joints, fasteners and trim accessories on gypsum wallboard. They can also be used for interior patching and repair. They are ideal for heavy
fills because they are specially formulated to harden with very little shrinkage in a prescribed time frame. Setting times are available from 5 minutes
to 210 minutes. Custom set times greater than 210 minutes are available upon request with minimum order quantities. Contact your CertainTeed sales representative for details.
309075 - ProRoc® LITE Sand 5
•
Lightweight
•
Chemical hardening
•
Low shrinkage
•
Sandable
TYPE
SELLING UNIT
Bag
11 kg / 24.2 Lbs.
309076 - ProRoc® LITE Sand 20
•
Lightweight
•
Chemical hardening
•
Low shrinkage
•
Sandable
TYPE
SELLING UNIT
Bag
11 kg / 24.2 Lbs.
309078 - ProRoc® LITE Sand 45
•
Lightweight
•
Chemical hardening
•
Low shrinkage
•
Sandable
TYPE
SELLING UNIT
Bag
11 kg / 24.2 Lbs.
309079 - ProRoc® LITE Sand 90
•
Lightweight
•
Chemical hardening
•
Low shrinkage
•
Sandable
TYPE
SELLING UNIT
Bag
11 kg / 24.2 Lbs.
309081 - ProRoc® LITE Sand 210
•
Lightweight
•
Chemical hardening
•
Low shrinkage
•
Sandable
TYPE
SELLING UNIT
Bag
11 kg / 24.2 Lbs.
312909 - ProRoc® Moisture and Mould Resistant 90
•
Formulated to resist moisture and mould
•
Chemical hardening
•
Sandable
TYPE
SELLING UNIT
Bag
11 kg / 24.2 Lbs.
FOR DISTRIBUTORS IN YOUR AREA, PLEASE CONTACT OUR CUSTOMER RESPONSE CENTER at 800-233-8990
Portions of this site require these fine products:
